Shop|Renders and Plasters|Lath Rend Forte 25 kg

Lath Rend Forte 25 kg

From£11.76 + VAT

Technical Guides

Forte Lath Rend

Lath Rend Forte 25 kg

From£11.76 + VAT
Base coat for stainless steel mesh
Product Name
Quantity
Price
£11.76

Lath Rend Forte

Forte Render Base Coat is a general-purpose undercoat render incorporating some white cement. It is suitable for modern masonry work that includes dense concrete blocks and brickwork.

A white mineral basecoat render for modern masonry including dense blocks and modern brickwork. Forte Render Base Coat is suitable as a scratch coat to give any wall a level and consistent background before a compatible finish coat is applied. Great for eco-friendly new builds, this undercoat render offers superior levels of breathability - water can evaporate easily and does not remain trapped.

Forte Render Base Coat is applied as a standard undercoat render either by hand or machine and finished with Lime Green Tradirend self-coloured render.

Available in 25kg paper sacks, with a shelf life of 6 to 8 months. Store in a cool dry place.

Coverage

Approximately 1.7kg per mm of thickness over 1m². One 25kg bag will cover approximately 1m² at
15mm thickness. This does not include any allowance for wastage.

Surface Preparation

The background must be level, well keyed and dampened to control suction. Forte Render Base Coat is only for application to
porous backgrounds such as masonry – do not apply over old paints or similar substances. Ensure the
background is free from dust, oil or contaminants. If necessary clean down with dilute brick acid or
fungicide before rendering. Tape up and protect windows and joinery.

How to Mix

One 25kg sack of Forte Render Base Coat will need approximately 4 litres of clean water. Mix for between 3 to 10 minutes using
a drum mixer or drill and whisk. Do not re-work. Working time is between 1 and 2 hours.

Application

Dampen the background to prevent rapid water loss from the undercoat render. Do not use in temperatures
below 5°C or above 30°C and do not apply in direct sunlight.
Do not overwork or polish Forte Render Base Coat. Typically apply in coats of around 10mm. For a thickness greater
than 15mm apply in 2 coats. Key the render before each further coat is applied

Please note these are not stock items and have to be ordered from the factory, which may incur a 7-10 day lead time

 

Technical Guides

Forte Lath Rend