Hover over the image to zoom

Womersleys Range Natural Finish Coloured 22Kg

In stock

04 £21.98 + VAT

11 £21.98 + VAT

21 £21.98 + VAT

23 £21.98 + VAT

24 £21.98 + VAT

25 £21.98 + VAT

26 £21.98 + VAT

28 £21.98 + VAT

29 £21.98 + VAT

30 £21.98 + VAT

31 £21.98 + VAT

33 £24.98 + VAT

34 £28.98 + VAT

32 £21.98 + VAT

42 £21.98 + VAT

70 £21.98 + VAT

73 £21.98 + VAT

75 £21.98 + VAT

82 £21.98 + VAT

86 £21.98 + VAT

146 £21.98 + VAT

A pure lime finish coat render incorporating marble aggregates to give a durable and attractive appearance without compromising breathability. Available in a range of colours and textures.

Natural Finish is self-coloured external lime render requiring no further painting. Using a natural water repellent it protects against the worst of the elements while remaining breathable.

The external finish of walls is one of the first things you notice about a property, our lime based external render finishing coat combines special marble aggregates and hydraulic lime to give a beautiful top surface, whether you use Ultra or Duro as the base coat.

Natural Finish external render is the perfect complement to a sustainably built house, allowing you to bring an eco-friendly product right to the heart of a home.

3m2 per bag at 5mm thick

A 22kg bag will cover approx.

2 ¼ - 2½ m² at 6mm thick. This does not include any allowance for wastage.

Mixing

Add the whole bag of pre-mix into drum or forced action mixer carefully avoiding creating excessive dust. Mix with clean water: add only 3.5-4.5 litres of clean water per bag. Mix for at least 10 minutes using drum mixer or use a mechanical whisk for 3 minutes. Stand for 10 minutes then mix again.

Apply to a previously applied undercoat of either lime green Ultra Natural or Duro Natural once the basecoat has hardened, but is still 'green'. Dampen surface with mist spray before application.

Application Guidelines

Temperatures: above 5°C and below 30°C.

Curing: cure each coat (see below) before further work.

Apply Natural Finish once the backing coats have had sufficient time to cure.

Natural Finish should be applied to a straight, flat, dampened surface upto a maximum of 4mm. Finish with wooden float and / or sponge.

Curing

Prevent all coats from drying out too rapidly. Lightly spray each coat with water if it is hot or the product is drying too quickly. Protect from adverse conditions such as frost, rain etc. Adequate curing of a final decorative coat should be more stringent, ideally using a fully sheeted scaffold when outside

 

Backing coat for Natural Finish Duro_basecoat

 

upto 4 bag orders will be delivered via parcelforce

Orders for over 4 bags will delivered via our carriers TPN – The pallet network, please ensure that:

-      you have supplied us with as much information as possible about the access, location and facilities on-site - it is helpful if you have more than one contact phone number for the driver

-    we have been made aware of any access restrictions, the delivery depot will assume any size vehicle can deliver unless specified  (including low trees, bridges with weight limits, narrow entrances, restricted turning etc). Even if builder’s merchants, rubbish, skip lorries etc have had no problem, our curtain siders used by the pallet network may well have trouble with height especially, so give us as much information as possible ;

 -    The goods will be dropped by a tail-lift, Please note that a tail-lift requires a large, flat area of hard-standing (not gravel and not on an incline) to be able to offload

-    that you have organised enough space for the goods to be put

Please ring with any queries beforehand as a failed delivery due to lack of prior informartion will result in a re charge for delivery