Tradirend is partnered with Lathrend as a through-coloured finishing coat for use where breathability is not of prime concern, and where the hardness of the wall construction makes a pure lime product inappropriate. However as lime is still the main component, the finish still looks like a traditional lime render. This quality makes the Lathrend/Tradirend solution ideal for new build extensions to old properties. 

Coverage- allow 1.7kg of dry product per mm of thickness over 1m²

Available in 12 colours - Tradirend is a lightly textured render containing max 2mm blended aggregate.

Tradirend has a shelf life 6 to 8 months if stored somewhere dry and cool.

Price is per 25Kg bag

Tradirend is a render made with natural hydraulic lime, white cement, sand and additives, carefully designed to give a durable high performance render. This render is generally used as a finishing coat of 6 to 15mm, normally as a finish coat over Lathrend. It only requires the addition of water.

A through coloured render topcoat with many of the benefits associated with a pure lime render such as good breathability, but made with the modern builder in mind. Contains NHL lime, cement and water repellents. 

Tradirend lime render is available in a range of colours and two textures, contact us for information on suitable backgrounds and undercoats. Samples and prices are available on request.

Tradirend is designed for a suitable background such as Lathrend. The background must be level, well keyed and dampened to control suction.

Fresh bulk density: 1700kg/m3 +/-100kg

 Mixing

Add full bags of Tradirend into a drum mixer. Avoid creating excessive dust. Add approximately 4 to 5 litres of clean water. Pour the water in slowly as the product mixes, using just enough to achieve the correct workability. Mix for between 3 to 10 minutes. Do not re-work. Please contact us for advice if required.

Application

Apply over a suitable basecoat such as Lathrend, ensuring that the background is clean, hard and has a good mechanical key. Adequately dampen the background to prevent rapid water loss from the render. For scraped finishes apply approx. 8mm and scrape back to 5mm; for floated finishes apply 5 to 6mm thick. Do not attempt to level up or build out using Tradirend. Uneven thicknesses will dry differently and cause colour variation. Complete entire elevations working with a continuous wet edge, finishing only on corners or natural breaks (e.g. behind down pipes etc.). Do not use in temperatures less than 5 ºC or over 30ºC and do not apply in direct sunlight.

Finishing

Do not over work or polish Tradirend. Suitable finishing techniques include scraping, sponge float, casting on, and sprayed finishes

Please note these are not stock items and have to be ordered from the factory, which may incur a 7-10 day lead time