Hover over the image to zoom

Fine Stuff (Top Coat Lime Plaster) 12L

In stock

£13.50 + VAT

FINE STUFF TOPCOAT (FINISH) PLASTER  12L 

MADE FROM MATURE BRITISH LIME PUTTY                            

EXTRA FINE TEXTURE READY TO USE

 

Product Detail:

A rich lime putty topcoat plaster made with fine silver sand and extra fine mature lime putty

Inside the tub you will find a premixed lime mortar, ready to use, it is made with matured non-hydraulic lime commonly known as “lime putty” or “fat lime putty

Non-hydraulic lime mortars set by carbonation, very gradually. This characteristic gives the product a long shelf life providing that the material is kept sealed and air-tight preventing carbonation.

The mortar may stiffen over time in storage but can be “knocked up” again and again to the ideal consistency

 

Application:

Preventing the plaster from drying out too quickly is key to the success of the application

Lightly spray the base coat and pour away any excess water in the fine stuff tub before application

Once the fine stuff is firm but not dry use a dampened brush to brush the surface in all directions. Avoid overworking, applying too thick or using too greater pressure on it will lead to crazing

During cold weather supplementary heating will be needed to keep the room temperatures above the minimum of eight degrees

Coverage – Approximately 3m2 per tub at 3mm thickness

 

upto 4 tubs orders will be delivered via parcelforce

Orders for over 4 tubs will delivered via our carriers TPN – The pallet network, please ensure that:

-      you have supplied us with as much information as possible about the access, location and facilities on-site - it is helpful if you have more than one contact phone number for the driver

-    we have been made aware of any access restrictions, the delivery depot will assume any size vehicle can deliver unless specified  (including low trees, bridges with weight limits, narrow entrances, restricted turning etc). Even if builder’s merchants, rubbish, skip lorries etc have had no problem, our curtain siders used by the pallet network may well have trouble with height especially, so give us as much information as possible ;

 -    The goods will be dropped by a tail-lift, Please note that a tail-lift requires a large, flat area of hard-standing (not gravel and not on an incline) to be able to offload

-    that you have organised enough space for the goods to be put

Please ring with any queries beforehand as a failed delivery due to lack of prior informartion will result in a re charge for delivery